Looks nice thictool. Looks like the Kontrols are shorter than DDM. What sort of TSI file do you have for the DDM? I made a three deck one with efx on the sides and led outputs.
Looks nice thictool. Looks like the Kontrols are shorter than DDM. What sort of TSI file do you have for the DDM? I made a three deck one with efx on the sides and led outputs.
@Twumpy
Kontrols are shorter by 4 inches....but I like that they are in line with the mixer section of the DDM.
Keep in mind if you look at these pics, my soundcard and mdi to usb convertor are illuminated (placed above the mixer). So it might look like the DDM goes on forever....but as I said it only 4 inches longer.
One nice thing is that the Kontrols one's and the DDM4000 are the exact same height.
As far as a TSI...I am toying with TPro just to keep track of the changes and understand the interface.....But in NO way am I in a hurry to use it in a live situation. Its basically a complete mess IMO.
The only feature I am really floored by in TPro is the 4 Bank FX....but the rest of the program is light years away from operating as intuativly as T3. Sure Tpro has alot of cool features....but the simple features and thier implementation have fallen to way side in lue of NI trying to play catchup. Tpro never should have been released in the state it is....never mind the state it was...
So I am still happily using T3.4 and have a killer TKS for my setup (shown above)
Last edited by thictool; 09-21-2009 at 02:12 AM.
traktor scratch pro, stanton scs3 system, hp pavilion dv3, korg nano series, kp3, mini-kp, stanton djpro3000 and stanton uberstand
RSTRCTD | twitter | facebook (RSTRCTD) facebook (LJ) | vimeo | pinterest | my studio | soundcloud (RSTRCTD)| soundcloud (LJ)
-- CHECK our DEBUT (DEEP)HOUSE EP RELEASE ON BEATPORT "RSTRCTD - EXISTENCE" --
No there are 4 Midi Channel layers within the unit.
Meaning Midi Channel layers 1 or 2 or 3 or 4.
You can swich between Midi channels by using the "Click" type knob located at the top of the unit.
The first position is Midi channel 1....if you turn the dial its clicks to the second position which would be Midi channel 2....if you turn the dial again its clicks to the third position which would be Midi channel 3....if you turn the dial again its clicks to the forth (and final) position which would be Midi channel 4
Remember there is a difference between Midi CC's And Midi Channels.
So even though the Midi CC numbers are the same for each button and fader etc.....the Midi Channel number is different for each Midi Channel layer (1 thru 4)
Are you getting this....?.....at all....?
dance tonight, absolution tomorrow!!
Soundcloud
http://soundcloud.com/pollux-13-1
http://soundcloud.com/pollux-13
http://www.facebook.com/Pollux13
dance tonight, absolution tomorrow!!
Soundcloud
http://soundcloud.com/pollux-13-1
http://soundcloud.com/pollux-13
http://www.facebook.com/Pollux13
|
Bookmarks