TSPTutor's Kontrol X1 SD Mapping

**Louie_V** · 08-09-2011, 11:25 PM

Mapping found at: http://db.tt/XGBJqB6

Hey guys,

just wrapped up making my first mapping for public consumption... hopefully you guys like it. I have included everything needed to get this up and running, and with the coming days and weeks i will be uploading videos on how to use it, install it, and re-create it.

For those that aren't aware, i've started a new project (TSPTutor), im not saying that i know everything about Traktor, but i figured what i do know i can pass on and what i dont will probly be beneficial to learn and regurgitate to others (helping me learn in the process)

both sides of the mapping are identical, and there is also a shift layer,
this mapping also has a slicer and a freeze delay on each sample deck (only 1 can be activated at a time)

anyways, its all here, ive included the following:

-Labeled PDF (anything with * before and after the label means you need to use the shift button)
-.TSI File (Actual Mapping)
-.NCC file (for controller editor) (Just Incase)
-.NCKX1 File (again just in case)

[and also a copy of this posting...]

Before installing make sure you activate 4 fx banks,
the fx bank 3 & 4 will need to be single fx banks or else you will have some remapping to do.

To install:
Part 1
-open controller editor
-Navigate to your kontrol X1
-Click "Edit" on template page
-Highlight "Append"
-Click "Open"
-Open the .NCKX1 file
-Save

Part 2
-Open Traktor 2
-Open Prefrences
-Click "Traktor Kontrol X1"
-Check box labeled "Enable Midi mode via SHIFT+HOTCUE"
-Next Click on "Controller Manager"
-Under device click "Add"
-Click "Import"
-Navigate to wherever you saved the "TSPTutor Kontrol X1 SD Mapping.Tsi" file
-open file
-Set in-port and out-port to your kontrol x1
-ENJOY!!!

if you have any question feel free to email me at TSPTutor.BBP(AT)Gmail.com
or hit me up via twitter @TSPTutor

MAPPING FOUND HERE: http://db.tt/XGBJqB6

*This mapping was made between both Traktor's Controller Editor and Xtreme Mapping on mac*

**Louie_V** · 08-11-2011, 01:36 PM

Anyone?

All feedback welcomed.

**Ashigari** · 08-12-2011, 03:35 AM

the pdf is a bit off. it's the form for labeling your own mapping, so to see what you mapped you have to click each slot and I couldn't see the shift mappings at all

**Louie_V** · 08-12-2011, 03:59 AM

Which ones were off for you? And the entire left side was labeled for the normal layer (mirrored on the right side) and the entire right side of the pdf was labeled for the shift layer (also mirrored on the right side)