Akai LPD8 mapping

[alex.ketch]

Hi Alex, I'm really looking forward to finally using my lpd8 with your mapping because it looks great but you seem to have forgotten to include the tsi in the zip file. It only contains the presets.

please help

The TSI is in post No. 14 (a few posts above you)

http://www.djtechtools.com/forum/sho...5&postcount=14

[Naked Jake]

The TSI is in post No. 14 (a few posts above you)

http://www.djtechtools.com/forum/sho...5&postcount=14

my apologies, I'm new to DJ tech tools I had noticed this thread had more than one page.

thank you so much.

I'll let you know if I get it working.

[carlo.bongiovanni]

Hi Alex,

your configuration is working, anyway I noticed a strange behaviour:

Imagine I am on bank 2 and put a loop on decks A and B. If then I go to bank 1 by pressing on program button + PAD1.. traktor goes out of the loop on decks A and B. It seems like he's receiving a sort of reset.. don't know what!?!

My configuration is TSP on WinXP, with only the LPD8 controller.

Thanks for any help, and congratulations for the work you've done! ;P

[XFX]

Hi Alex,

your configuration is working, anyway I noticed a strange behaviour:

Imagine I am on bank 2 and put a loop on decks A and B. If then I go to bank 1 by pressing on program button + PAD1.. traktor goes out of the loop on decks A and B. It seems like he's receiving a sort of reset.. don't know what!?!

My configuration is TSP on WinXP, with only the LPD8 controller.

Thanks for any help, and congratulations for the work you've done! ;P

Same problem for my mapping! I think, that everyone have this problem.

[carlo.bongiovanni]

Same problem for my mapping! I think, that everyone have this problem.

yes, I contacted Alex personally, and he confirmed we all have this same problem.

I'm now trying to change the midi values to see if I can solve the problem (have to study some traktor basics).. I'll let you know if I discover anything new...

[XFX]

Guys, any news?

[David Tjin]

yayyy!! its finally working!! i imported the .tsi file and now the blue MIDI light on TSP is on whenever im pressing the pad..

thx alex..

[dj sk]

Hi Alex,

your configuration is working, anyway I noticed a strange behaviour:

Imagine I am on bank 2 and put a loop on decks A and B. If then I go to bank 1 by pressing on program button + PAD1.. traktor goes out of the loop on decks A and B. It seems like he's receiving a sort of reset.. don't know what!?!

My configuration is TSP on WinXP, with only the LPD8 controller.

Thanks for any help, and congratulations for the work you've done! ;P

i think the controller will usually do this when it is in toggle or momentary in the lpd8 software, the easiest way to tell is if when settin the loops does your light on the pad stay illuminated, if so save your settings first before u do anything.

then open akai software and get preset from device for banks 1 and 2 then make sure each pad on akai software underneath says momentary not toggle.

i hope i make sense, if i do then im so sure this will help.

please note if your buttons are not staying lit then this method will not work.

[Miguel Cordeiro]

Hope it works well with mine

[Sonarious]

I'm having some trouble with my LPD8. I've mapped it on my own to complement my Hercules DJ RMX, mainly the effects I want to transfer on to the LDP8 so that I don't have to work with much modifiers anymore as well to have two rotaries for my balancers. But here's the deal.

What I do:
- Assigned all chained effects to PAD in prog. 1
- Switch CC in prog. 1

What happens:
The harder I push the pad, the more a rotary on the chained FX unit starts to swing! For example; when I push pad 5, the chained dry/wet rotary on FX unit 2 starts to swing up! And that while I haven't mapped pad 5 under CC to any function!!! How can this be? Does it have something to do with my output? Please help!