all works properly
all works properly
if you can make it a little bit slower i mean less sensitive it will be perfect
That's not problem at all. I've decreased sensitivity by 10%
If there is need you can tell me to edit it on and on till we got it set to perfection (scratch and pitchband both).
-Added LED output to headphone buttons. It should lite up (if on) while mixer shift is on hold.
ctrl-7.tsi
Nice, let's change this scratch : -10% sensitivity and +20% for pitchband please
and i don't know wich LED you are talking about :s
Both adjusted as you suggested.
I'm talking about headphone cue LED's that I mapped to deck load buttons. Lets say you have switch both of them in software and then hold of mixer shift /FOLDER/ button. The moment you press this shift both LED's need to lite indicating those headphone cues are switched on in program. When you release shift, both LED's should shut down since this function work only with mixer shift related. Hopefully this got more sense to you now?
ctrl-7.tsi
It's good for the adjustement and ok for the LED too
Ok then, I'll set same settings to deck B jog wheel, good to hear LED is working too. I missed to add tree expand/collapse to browser folders opening,will include it in next update
Oops i forgot to test both led together when i Shift with "folder out" and only one LED works i mean just "LOAD A" or LOAD B" but not together (the last headphone cue switched on) i hope i understood what you told me about those led
But don't worry if LED's don't works it's just details
I'm about to map hotcues and for hotcue 3 on deck A you labeled /C#+1/ which doesn't exist in MIDI assignments list. Can you please check if this is right assign for this button?
|
Bookmarks