Korg Nano Kontrol Traktor Setup

[gelivan]

Hey, I had almost the same ideas for my TSI.

not finished yet but I'll post it when done.

[rodaeche]

Does somebody know how to keep the led on in buttons, when function mapped is activated??

[Str8upDrew]

The leds on the NanoKontrol are not midi controlled, the closest you can do is set them to toggle mode using korg's kontrol editor.

[Wickedsight]

Is it possible to map the transport section to use it for browsing?

[Str8upDrew]

Yeah, that's actually how i have mine setup now.

[jon-e-groove]

Hello everybody, I just created a Mapping for the Korg nanokontrol and Traktor!
you can download the Tsi and the Nktrl_set files from here:

http://www.mediafire.com/?i2xssybf388pn

Enjoy

[x-ray]

hi there.

i released a Controller Preset (.tsi) for Korg NanoKontrol today.


you can get it here:

http://www.traktorbible.com/freaks/m...ew.aspx?id=104


includes the traktor .tsi, korg kontroleditor .nktrl_set, an image with mappings and a readme_file with instructions.


included features are:

- Track A/B Start/Stop & Volume Fader
- Crossfader A/B
- Cue/Cup for Track A/B
- Monitor Mix (Monitor to Master Knob) and Track A/B Monitor ON/OFF
- Track Seek for A/B (Knob)
- Playlist Selection (Up/Down) and Load Track to Deck A/B
- EQ Section Lo/Mid/Hi for A/B
- Pitch Section with Pitch Fader, SYNC ON/OFF and Scratch Hold for A/B


have fun ! =)

x-ray

attached the zip file to this post.

[trappar]

I wrote a 4deck/4fx mapping and a 4fx mapping you guys might want to check out.

Both are available here

[Alan9]

This midi mapping allows

• full mixer with filter, EQ, and tempo control
• all 4 decks can be used (A/B/C/D)
• control over 6 effects
• cue points 1-8
• Looping
• browsing and loading tracks
• no need for mouse or keyboard (unless doing a search)

In my setup I made it so that the left is channel A, the right is channel B, and the middle is the "mixer". Ive made a diagram because explaining all of it in text would be tedious to write and hard to understand.

One thing that isn't in the diagram is what the modifers do:

The first one (red record button) opens up the secondary features of many buttons for things that aren't as often needed such as:
(these work while the record button is held)

• Change Effects = all of equilizer faders (bass,mid,hi deck)
• /2 BPM - effect button 1 (deck A) / effect button 8 (deck B)
• x2 BPM - effect button 2 (deck A) / effect button 9 (deck B)
• scroll thru track - volume faders A/B
• Cue Pts 5-8 - Cue Pts 1-4
• Deck Select - Sync A/B

The next modifier is the "loop increase" button (above the rec. button)
It makes the A/B configuration turn into C/D when it is held. Every mixer/cue/effect button still works but for the C/D including the rec. button modifiers and loading buttons (explained next)


Finally the "loop decrease" button makes it possible to see a full screen track browser and allows you to load tracks.

The controls are as follows when holding this button:

• knob 1 scrolls through favorites
• knob 2 scrolls through selected folder's tracks
• load track in A - filter kill A
• load track in B - filter kill B
• load track in C - filter kill A PLUS "loop inc."
• load track in D - filter kill B PLUS "loop inc."

here is a link to my .TSI file:
http://s000.tinyupload.com/download....16289765611562

here is a link to my kontrol editor file:
http://s000.tinyupload.com/download....34243183084528


Give it a try and let me know how you like it. most of the mappings should make sense but some i just had to put somewhere...