My ldp8 Mappings for Traktor pro 2 (with working leds)

[AndrewFuse]

Have some problems.
1) Prog #2: deckalized+ins grat. doesn't work for me, or i dont understend something.
Are working only pad5-7 and only as delay. and only on side B.

2) M1=1+M2=1 what is this for combo? Thats prog #3: Clear sample slot.

[robertowps]

feedback please thanks

[robertowps]

Ldp8 Controlerism mapping
ALL IN ONE basic controlerist MAPPING (v0.9) with working leds
Features : Files browsing, 2 decks, loop control, 8 hotcues, Instant gratifications FX on both decks.

Program 1*: Transport and looping
Knobs*:
Knob*: K1-K4*: Filter + Three band Equalizer Deck*A
Knob*: K5-K8*: Filter + Three band Equalizer Deck*B
Pad Mode*:
Pad 5*: Load+Loop+Play Deck A + Select mixer layout
Pad 1*: Load+Loop+Play Deck B + Select mixer layout
Pad 6*: next track + select browser layout
Pad 7*: previous track + select browser layout
Pad 2*: page up + select browser layout
Pad 3*: page down+ select browser layout
Pad 8*: switch layout
Pad 4*: Add as next to preparation list (as I plan to use this tiny beast for casual mixing in friend's flat or for preparing playlist)

CC Mode*:
Pad 5*: Play/pause deck A
Pad 1*: Play/pause deck B
Pad 6*: Loop Set Deck A
Pad 2*: Loop Set Deck B
Pad 7/8*: Decrease/Increase Loop Size Deck A
Pad*3/4*: Decrease/Increase Loop Size Deck B


Program 2*: Track control
Knobs :
Knob : K1-K4 : Filter + Three band Equalizer Deck A
Knob : K5-K8 : Filter + Three band Equalizer Deck B
CC Mode*:
8 hotcues for deck B

Pad Mode*:
8 hotcues for Deck A


Program 3 & 4 : "Instant gratification" ertzatz FX control
For both deck, I remap two kind of midifighter for deck A on program n°3 and deck B on program n°4. I did a few mistake when adapting the midifghter mapping wich have to be solved in order to have 3working combos. Of course there's no bank mode,but you can hold an Fx on deck A or B by pressing pad 1 for deck A on program 3 and pad 2 on deck B on program 4. You can't do the combo, cause the 16 pads are on CC and pad mode, but you can hold an fx from CC mode, if you switch quickly in pad mode then pressing the hold button.


Cause, there's three mappings, plus fx presets, you need to use the big import button to make this mapping works... oh... and don't forget to load the correct presets...



LEDS mapping*:
Program 1*: Play notification on pad 5 & 1 in Pad mode
Program 2*: Deck A*: Vumeter in play/Inverted vumeter in Loop
Program 3*: no leds map yet (v0.8)
Program 4*: Playing sample deck = led on in CC mode only

Incoming Improvements :
Solving a few fx bugs... Attached Files
ldp80.9Contrelerism.tsi (2.02 MB, 20 views)
no hablo english esse é o midi mapper intant gratification help please thanks thanks thanks for mapping !!!!!???

[Just Friday]

Ldp8 Controlerism mapping
ALL IN ONE basic controlerist MAPPING (v0.9) with working leds
Features : Files browsing, 2 decks, loop control, 8 hotcues, Instant gratifications FX on both decks.

Program 1*: Transport and looping
Knobs*:
Knob*: K1-K4*: Filter + Three band Equalizer Deck*A
Knob*: K5-K8*: Filter + Three band Equalizer Deck*B
Pad Mode*:
Pad 5*: Load+Loop+Play Deck A + Select mixer layout
Pad 1*: Load+Loop+Play Deck B + Select mixer layout
Pad 6*: next track + select browser layout
Pad 7*: previous track + select browser layout
Pad 2*: page up + select browser layout
Pad 3*: page down+ select browser layout
Pad 8*: switch layout
Pad 4*: Add as next to preparation list (as I plan to use this tiny beast for casual mixing in friend's flat or for preparing playlist)

CC Mode*:
Pad 5*: Play/pause deck A
Pad 1*: Play/pause deck B
Pad 6*: Loop Set Deck A
Pad 2*: Loop Set Deck B
Pad 7/8*: Decrease/Increase Loop Size Deck A
Pad*3/4*: Decrease/Increase Loop Size Deck B


Program 2*: Track control
Knobs :
Knob : K1-K4 : Filter + Three band Equalizer Deck A
Knob : K5-K8 : Filter + Three band Equalizer Deck B
CC Mode*:
8 hotcues for deck B

Pad Mode*:
8 hotcues for Deck A


Program 3 & 4 : "Instant gratification" ertzatz FX control
For both deck, I remap two kind of midifighter for deck A on program n°3 and deck B on program n°4. I did a few mistake when adapting the midifghter mapping wich have to be solved in order to have 3working combos. Of course there's no bank mode,but you can hold an Fx on deck A or B by pressing pad 1 for deck A on program 3 and pad 2 on deck B on program 4. You can't do the combo, cause the 16 pads are on CC and pad mode, but you can hold an fx from CC mode, if you switch quickly in pad mode then pressing the hold button.


Cause, there's three mappings, plus fx presets, you need to use the big import button to make this mapping works... oh... and don't forget to load the correct presets...



LEDS mapping*:
Program 1*: Play notification on pad 5 & 1 in Pad mode
Program 2*: Deck A*: Vumeter in play/Inverted vumeter in Loop
Program 3*: no leds map yet (v0.8)
Program 4*: Playing sample deck = led on in CC mode only

Incoming Improvements :
Solving a few fx bugs... Attached Files
ldp80.9Contrelerism.tsi (2.02 MB, 20 views)
no hablo english esse é o midi mapper intant gratification help please thanks thanks thanks for mapping !!!!!???

Hey hey!!!!

Thanks for the video review!!! It was missing for my midimaps page.
Hope to do a better pdf manual sooner.

[primejonny]

Drive mappings not staying upon log off?

[djflight]

hey did you fix the Bugs in this Mapping I'm using it now its awesome but theres still a few bugs on program 3 &4 n no LED meter

[Just Friday]

Hi Djflight... Thanks for the nice feedback... If you liked the mapping give a + at his map page : http://maps.djtechtools.com/mappings/393
It's normal there's no Led Meter on Bank 3 and 4 cause I doidn't map it...

I'm actually totally reworking the whole mapping to make it more efficient and more intuitive (based on my midifighter last mapping)

Hope you can wait a few weeks... Mapping a time consuming activity and I make it only on my spare time...