Sosik's VCI-300 2D TSI [BETA]
Page 1 of 8 12345 ... LastLast
Results 1 to 10 of 78
  1. #1
    Tech Wizard
    Join Date
    Jan 2009
    Posts
    42

    Default Sosik's VCI-300 2D TSI [BETA 0.2] (29.03.09)

    2 Sleepless nights and here we go - my vci-300 mapping is almoust done.
    I'm not a professional dj or a producer, started recently and it seems to work out slowly.
    What you will get here is my Traktor Pro 1.1.1 mapping for vci-300 which I tried to make Itch-like as much as possible. So basicly you will have such functions as CUE/PLAY, PFL A/B, SCROLL, Playlist/Browser Navigation, AUTO TEMPO / SYNC, SHIFT, EQ's, AUTO LOOP and all other basic stuff beside CUE's, working like they should(I hope :P). Also I set up a realy nice FX1(chained) interface on the controller, hope you will like it.

    All kind of feedback is appreciated, its beta and still requires alot of work.


    HOW TO USE?
    All basic functions are same as Itch.

    Navigation:
    - UP/DOWN to select up and down in the list/tree
    - TAB to switch between tree and list
    - BACK/FWD to Collapse/Expand the tree
    - SCROLL to scroll with left or right Jog's through list
    - [SCROLL] + PFL A/PFL B to load a track into deck A/B
    - PFL A/PFL B to turn monitor for deck A/B on

    - AUTO LOOP to activate loop of set size
    - HALF / DOUBLE to change size of AUTO LOOP
    - [SHIFT] + HALF / DOUBLE to move cue or loop one step to the left / right

    - AUTO TEMPO to synth the tempo and adjust slave to master
    - [SHIFT] + AUTO TEMPO to synth only
    - KEY LOCK to lock the key
    - [SHIFT] + KEY LOCK(left/right) to turn snap/quant mode on

    - [SHIFT] + BACK/FWD to copy deck A<B/A>B

    Misc:
    - [SHIFT] + CENSOR to activate filter
    - [SHIFT] + TRIM = Filter amount

    - [SHIFT] + X-Fader to seek through decks

    FX Chained(Left side):
    - [SHIFT] + CRATES activates the FX1 interface + LED "interface" on controller
    - TRIM = Dry/Wet, HIGHT/MID/LOW = Effect 1/2/3 Amount
    - CUE1/IN, CUE2/IN, CUE3/IN = Effect 1, 2, 3 Select Next
    - [SHIFT] + CUE1/IN, CUE2/IN, CUE3/IN = Effect 1, 2, 3 Select Previous
    - OUT1/LOOP, OUT2/LOOP, OUT3/LOOP = Effect 1, 2, 3 On(Hold)
    - [SHIFT] + OUT1/LOOP, OUT2/LOOP, OUT3/LOOP = Effect 1, 2, 3 On(Toggle)

    FX Advanced(Right side):
    - [SHIFT] + BROWSE activates the FX2 interface + LED "interface" on controller
    - TRIM = Dry/Wet, HIGHT/MID/LOW = Effect Param 1/2/3
    - OUT1/LOOP = Effect Select Previous, OUT3/LOOP = Effect Select Next
    - CUE1/IN to reset parameters
    - OUT2/LOOP = Dry/Wet(Hold)
    - [SHIFT] + OUT2/LOOP = Dry/Wet(Toggle)
    - CUE2/IN, CUE3/IN = Effect Button 1, 2(Hold)
    - [SHIFT] + CUE2/IN, CUE3/IN = Effect Button 1, 2(Toggle)

    - [SHIFT] + PITCH SHIFT UP/PITCH SHIFT DOWN turns Effect Unit 1/2 on

    EQ while in FX(Both sides):
    - [SHIFT] + HIGHT/MID/LOW = EQ - HIGHT/MID/LOW

    Cue(basic):
    - CUE1/IN, CUE2/IN, CUE3/IN Select Hotcue 1, 2, 3


    Fixes(temporary):
    - [SHIFT] + FILES to reset tempo bend to 0.0%


    UPDATES(04.05.09)

    New in 0.2:
    - Smart Scratching*
    Scratch on fly while playing(Itch-like)
    - FX2 Advanced
    Easy to use control with nice LED interface
    - Fully functional middle controller part
    Browsing, track loading, cue monitoring, everyting Itch-like with some smart controls
    - Added many new controls to cover more TPro functions
    - Fixed some bugs for better VCI-300 - TPro interaction
    - Few small tweaks

    New in 0.2.1 - 0.2.2:
    - X-Fader seek
    - Small fix to reset Tempo Bend to 0.0% (accurate for 1/10% only)
    Even TP build in function to reset tempo does not fully reset it

    - Added description for filter control
    - Added EQ mode "while in FX mode"


    * Since TPro is mixing up signals of both jog-wheels I would not recommend you to scratch with both at the same time.

    Have fun!
    Last edited by soulst; 05-04-2009 at 05:35 PM.

  2. #2
    Tech Convert
    Join Date
    Feb 2009
    Location
    Belgium
    Posts
    19

    Default

    thks Sosik's! Will try it later. Will send you some feedback after.

  3. #3
    Newbie
    Join Date
    Oct 2008
    Location
    Germany
    Posts
    4

    Default

    Hi soulst,
    very good work.

    I am also in search, try it myself, to create a mapping for the vci 300 like in itch.
    My aim is only to create the functions as they appear on the vci and working like in itch (especially for the jogwheels and leds).

    I hope that we will as soon as possible get a "original/official itch-traktor pro midi mapping".

    Thanks (also to claudek and Morbido for their great work)
    DigitalMac

  4. #4
    Tech Wizard
    Join Date
    Nov 2008
    Posts
    26

    Default

    Great Stuff, keep it up

  5. #5
    Tech Wizard
    Join Date
    Nov 2008
    Posts
    26

    Default

    Any updates to this TSI?

  6. #6
    Tech Wizard
    Join Date
    Jan 2009
    Posts
    42

    Default

    Unfortunetly I'm pretty busy at the moment and I don't have time for this. I will see if I can update it this week.

  7. #7
    Newbie
    Join Date
    Jan 2009
    Posts
    3

    Default

    Can someone tell me how to use the vci 300 in traktor step by step.
    thx

  8. #8
    Tech Wizard
    Join Date
    Jan 2009
    Posts
    42

    Default

    Turn your vci-300 on and go to MIDI Setup in TPro. There you choose midi input and output, its either USB Audio Device or the actual name. Turn it on by double clicking on it. Thats it.

    Edit: And ofcourse go to MIDI Mapping and import the tsi.
    Last edited by soulst; 03-27-2009 at 10:15 AM.

  9. #9
    Newbie
    Join Date
    Jan 2009
    Posts
    3

    Default

    Do i have to use the midi translator? i run traktor pro demo.

  10. #10
    Tech Wizard
    Join Date
    Jan 2009
    Posts
    42

    Default

    If you are running version 1.1.1 or higher you don't need the translator any more.

Page 1 of 8 12345 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •