For those who have painted / modded a VCI-100 case, I need some advice...
Did you sand off the existing finish completely before adding the primer? Or did you just paint right over it?
For those who have painted / modded a VCI-100 case, I need some advice...
Did you sand off the existing finish completely before adding the primer? Or did you just paint right over it?
I think you can do both.
here's a post with pics of a sandblasted case;
http://www.djtechtools.com/forum/sho...arcade+buttons.
But if you want to do a arcadebutton mod, you don't have sandblast,
because I think maybe there will be soon overlays for the arcade button mod.
but not sure about that.
have a look here;
http://www.djtechtools.com/forum/sho...light=overlays
And if you just want to change the colour of your housing, you can make the black/silver paint
rough with some sandpaper, and spray it in any colour you like.
Last edited by Anthony More; 02-23-2009 at 06:52 PM.
Macbookpro 2.4 i5 4gb
Traktor Pro 1.2.6.
Black VCI-100 Mod firmware 1.3
Presonus Firebox
Thank you kind sir!!!
I've already started my arcade mod. I had a machinist cut me out a replacement overlay plate for the buttons. (It looks exactly like the the original VCI plate, except it has round buttons.) I think I'm just gonna scuff it up, lay etch primer and then paint it. I'll post pics soon...
Will the spray paint adhere if I sand the case first, but don't use any primer? It is gloss protective enamel (not sure if that matters)?
i went crazy on mine and sanded the anodized layer, etch primed the metal, primed the metal. then painted it... still not actually finished with it though lolz - i put it back together so i could mix and havent got around to finishing the paint job on it yet lolz
I am doing mine now, I sanded the original coat, and then have sprayed a coat of primer and am doing 2 coats of spray paint, pulling an all nighter job is going to suck tomorrow (lol have to go in at 7:30am) hopefully I will have these up for you all tonight, it depends on how long I let everything dry for before putting it back together.
Here's a nice pdf I found explaining how to paint PC cases which I believe is very similar to painting the VCI case... or any housing case for that matter...
I found it off of a computer modding forum.
ftp://ftp.sybex.com/4360/4360ch08.pdf
Just a FYI...
|
Bookmarks