the cue buttons dont work for me.. im trying to listen to the songs on different decks and I cant how can i fix it.. help..
the cue buttons dont work for me.. im trying to listen to the songs on different decks and I cant how can i fix it.. help..
there is a knob called ph mix, two little dials above the cue buttons...
make sure they are turned on so you can hear something...
the ph mix should be around 7 o clock for cue only, if you want to hear cue + playing then it should be 12 o clock and just playing 5 o clock
also what sound card do you have and how have you setup the monitoring in the options
i have the audio 8 dj sound card
hi,
ive noticed that when i use the ''Hi-low cut Knob" on channel A, more specific every time i center the knob it increases the Effect on Channel B.
for eg; when using the FilterFT2L/W and use the ''Hi-low cut Knob" on channel A when i center it the High Knob of Channel B increases step by step.
has anyone else experienced this? im using VCi-100 SE TKS Vesion 1.2.
what to delete in the midi page i dont want this feature and i dont know
if something else will be affected so i thought i ask.
has anyone maped what CC,program changes and midi comes out of each knob n Button on the SE like a tx or a pic ? it be cool and very usefull
no one else has this problem with the effect knobs?
-dIm-
- Acer5050 Amd Turion 2Ghz 2GB RAM - Echo Indigo Dj - Audio DJ 8 - VESTAX VCI-100 SE - Ecler Nuo 4 - X-Session - Trigger Finger - Korgkaoss Pad Entrancer - Korg MicroKontrol - Novation25SL - 2 x Tec1210.
Dj software - TraktorDj 3.3 - Traktor Scratch 1.2
Thats very strange, I have never seen that problem. I would recommend downloading MidiPipe.
* check to see what messages are being sent out by that knob
* post a picture of the messages.
* if something random is going out it would show up there.
hi Ean,
i dont think there is a problem with the midi comming out of the vci-se, cant use midipipe im on pc,
i was looking in midi setup and found that knob 3A n 4B are assigned the same notes, is that a mistake? look at the pics i post.
ive deleted knob 4B (inc) shown in picure 1 and it works ok,but what should i do in the second picture?
same knob duplicates are in all 4 midi pages of the tks.
dim
-dIm-
- Acer5050 Amd Turion 2Ghz 2GB RAM - Echo Indigo Dj - Audio DJ 8 - VESTAX VCI-100 SE - Ecler Nuo 4 - X-Session - Trigger Finger - Korgkaoss Pad Entrancer - Korg MicroKontrol - Novation25SL - 2 x Tec1210.
Dj software - TraktorDj 3.3 - Traktor Scratch 1.2
question.. im using vci-100 se and I want to change the preset configuration for the h/l filter pass.. so that Q is set to 25 instead of 50 when i hit the filter button...
what is the easiest way to do this? I am not very good with the midi stuff.. can I just manually edit the tks file?
Yes- you would need to edit the TKS. But its not going to be that simple becuase you need a value coming from the vci-100 that is <64 (half of 127) I think there is one that is 53 on that button- so that will get you closer. You will need a midi monitor to figure out what CC its being sent on and manually enter that into the midi window in traktor.
|
Bookmarks