fade to gray effect

[photojojo]

If you've got the same thing mapped to two different things in two different tsi's then there's a problem. So if you want to load a tsi that you use with one knob then you'll have to make sure there's no conflicting messages in your current tsi's.

[MisterMoleyMole]

ok this is my work so far ... just learn one knob of your choice to all commands in this mapping. Let me know if you have any issues and once ive got to hera the proper fade to grey again i will see if this can be tweaked.

this mapping with the turn of a knob should ....

changed fx bank 1 & 2 to advanced mode banks if not already

load filter92 into bank 1 and delay into bank 3

assign fx bank 1 & 3 to deck a

increase the HP filter whilst decreasing the low pass filter whislt also upping the dry wet on the 3/16 delay

Its rough but you should be able to see wat ive done with the mapping and tweak as you like.

If you want me to try and do anything else just let me know.

Gav

[MisterMoleyMole]

Anyone managed to try it?

[faraguti]

Im trying here... I must go to controller manager, import and import the tsi... And now?

Im a noob =[

[victoryrisen]

Now, I've never heard this effect, but I just want an understanding of it:

Essentially it's just a Filter 92 + Delay?


In another thread we've been working on creating multiple effects for a super knob, so this may be extremely useful.

[MisterMoleyMole]

You need a spare knob to map all the commands to.... go to the first one click learn and turn the knob, go through every command in the Tsi learning to the same knob.... once done unclick learn and close settings play a track and turn that knob slowly :-D :-)

[faraguti]

let me try now, hang on

[faraguti]

when i hit learn, nothing happens... i tried importing with the lower button and inside the controller manager..

Really sad =[

[MisterMoleyMole]

Ahh you will have to change the ports to the ports of your controller i think.

[MisterMoleyMole]

If you've got the same thing mapped to two different things in two different tsi's then there's a problem. So if you want to load a tsi that you use with one knob then you'll have to make sure there's no conflicting messages in your current tsi's.

Is there some form of maximum number of tsis you can use in one session?