midi fighter mod

[smallhouse]

I'm new to controllerism and soon to buy a midi fighter classic. on the circuit board it has (my vocabulary is awful btw) an analogue expansion kit. i want to know if i can just solder on (for example) a rotary potentiometer straight to the board or if i need to put anything else on? (e.g. more circuit boards or wires etc.)
any reply is greatly appreciated thanks

[michael133]

you will need wires to add anything as all analogue controls have to go to ground, 5v and 1 of the A1-A4 slots of the board.

for example for a standard potentiometer

pin 1= ground
pin 2= A1
pin 3 = 5v

i hope this is of help to you,

be aware rotary encoders need to go to a digital expansion pin as do buttons those pins only require ground no power

[smallhouse]

thanks