-
need help for mapping behringer bcf 2000 with traktor scratch pro?
Need help with this please if someone has any ideas, I'd really appreciate
-
You could use the Faders to the Deck A + B Volume and EQ (Yes, Fader for EQ). You have 4 faders for each deck
You can use the Knobs for FX slot 1 + 2. You have 4 pots for each slot that would fit your dry/wet plus 3 FXs param or 3 Chained FXs.
You can use the first horizontal row of buttons to trigger FX ON
You can use the second horizontal row of buttons to the functions | Sync | Master | Pitch + | Pitch - |
You can use the bottom 2x2 (4 buttons) for activate FX Slot 1 + FX Slot 2 for Deck A + B
What you will be lacking:
Transport buttons (play, pause, cue, move)
Loop Control
Dedicated Filter + Key knob
FX Custom Selection
EQ Kill Switch (but you can map your fader to kill the EQ band when it reachs zero value)
Dedicated control for track selection
If you like the Shift Key, you can create other "modes" by pressing the preset button
To complete your setup you can pair a MidiFighter or any other pad controller (LPD8 maybe) for transport and looping controls
It's just an idea... Good luck
-
Tech Mentor
are you using timecoded vinyl to control the transports, what do you use regularly that you
need hands on control for and is the bcf in midi or hui mode?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks