So I am making my own tsi for my Xponent and Nanopad. I have pretty much everything setup apart from one or two things.
I want to make use of the fact that T pro always has a filter in the mixer and decided to assign this to the gain knob on the Xponent. I tried to set it so that when the gain kill switch (no such thing in Traktor) is held down, the knob controls the filter and when released, it controls the gain.
To do this I made a modifier, M8 and set M8=1 and pressed the kill switch. Then I set filter on as the kill switch and set it to hold with no modifier.
Next I set a filter control to direct and mapped it to the gain knob with m8=1, thinking that this meant it would only change when the kill switch was held.
However, this bloody thing won't work properly! When I turn the knob without the kill switch pressed, only the gain knob moves in traktor. Which is what i want. BUT when I hold the button down, the filter turns on yet turning the knob doesn't affect the filter at all. AND the gain still moves aswell.
I don't have a clue whats wrong so any advice would be aweshum! I will be eternally gratefull to anyone who can help!
Oh and if someone can give me an answer to this problem aswell:
http://www.djtechtools.com/forum/showthread.php?t=2827
I will probably actually cry. I'm that stuck.
Bookmarks