Hey guys i'm new to the forums im just wondering about possible putting some of the dj tech tools fluro coloured knobs to brighten up the controller.
I was wondering what steps i would need to undertake this task.
Hey guys i'm new to the forums im just wondering about possible putting some of the dj tech tools fluro coloured knobs to brighten up the controller.
I was wondering what steps i would need to undertake this task.
Ibtf!
Edit: Actually I don't think it is that easy... there are a couple of threads on it and I seem to remember someone had to very carefully widen the hole on the bottom of the knob with a screwdriver to make it fit the post properly.
TSP 2 | Serato DJ | Live 8 | MBP (SSD + HDD) | AIAIA TMA-1 Fool's Gold Edition | 1200 Mk2s | MidiFighter | KRK RP5
Xone: DB4 | Pioneer CDJ-2000 Nexus
DJTT FAQ | Read my guide to AUDIO CABLES
ah yes, same thing happens with my X1 (what a surprise )
They did manage it though didn't they?
TSP 2 | Serato DJ | Live 8 | MBP (SSD + HDD) | AIAIA TMA-1 Fool's Gold Edition | 1200 Mk2s | MidiFighter | KRK RP5
Xone: DB4 | Pioneer CDJ-2000 Nexus
DJTT FAQ | Read my guide to AUDIO CABLES
That was me, and it was for the faders only that I had to do a little McGuyvering with a screw driver.
The knobs go on no problem!
They do sit slightly higher than the stock knobs, but it's not that much higher. You could always drill them out a little to lower them.
Heres the original thread. http://www.djtechtools.com/forum/showthread.php?t=24213&highlight=djtt+knobs
-- Sound Cloud -- YouTube ---- Mix Cloud --
|
Bookmarks