Post Photos of Your MOD Gear HERE

**DJ Sureshot** · 02-07-2011, 04:25 PM

Not exactly the crazies mod but it's what i got:

I've been stalking the DJTT webstore for the knob/fader packs to be back in stock. loving them. i play alot of dark booths and these are lifesavers!

**djproben** · 02-08-2011, 03:39 PM

OK this isn't really a mod either but ... since I can't afford an S4 but I'm really jealous of the FAT FILTER KNOBS on it, I made a slight change to the VCI....

Fun to use but a bit on the large side; I just ordered some that are slightly smaller.

**bigbeatzz** · 02-09-2011, 08:29 AM

Originally Posted by djproben

OK this isn't really a mod either but ... since I can't afford an S4 but I'm really jealous of the FAT FILTER KNOBS on it, I made a slight change to the VCI....

Fun to use but a bit on the large side; I just ordered some that are slightly smaller.

Hugified! Post a pic with the new ones...I've actually seen the ones for a DJM 800 on Ebay. Might be an option for you if the next batch is no good.

**etch** · 02-13-2011, 09:58 AM

My midifighter inspired controllers, the WoofHIBA and WoofHIBA II

the larger isnt quite finished, two rotary encoders still need knobs (one isnt in controller yet, still to be wired up) and got some nice new caps for the faders, this is about to replace my VCI100SE as my out rig, custom mapping to follow shortly!

ones based around an old mac keyboard (the smaller one) and the larger is based around an Arduino Mega 2560 (LED feedback is one of the first mods to be made in the future)

Attachment 4632

**MrFirpo** · 02-13-2011, 05:31 PM

This is my recently finished mod of my Digital Jockey 2. Play, Cue and Cup buttons were completely changed and modified with 12x12 Omron B3F switches, and some led customization was made for better orientation in dark circumstances.

Cheers,

Mr Firpo

**ToS** · 02-13-2011, 08:37 PM

A masterpiece.

**DJ no name** · 02-13-2011, 10:41 PM

@etch......nice cohiba box......lol

**Robin Raydon** · 02-16-2011, 04:15 PM

This is my little DIY Midi-Arcade Controller... (and a DN-SC 2000)

It is made of painted wood, plastics, Alps Pots, Sanwa buttons, many LEDs and Burns Faders, 40m wire and four gamepad PCBs. I started the project in December and just finished it today... now its mapping-time

**fullenglishpint** · 02-16-2011, 04:50 PM

Originally Posted by Robin Raydon

This is my little DIY Midi-Arcade Controller... (and a DN-SC 2000)

It is made of painted wood, plastics, Alps Pots, Sanwa buttons, many LEDs and Burns Faders, 40m wire and four gamepad PCBs. I started the project in December and just finished it today... now its mapping-time

Very nice indeed!!