Vci-100 1.4 (hd) firmware upgrade

[pARtybOy]

When are the Firmware Kits available?
looking forward.

[Moosz]

Thank You Fullenglishpint, for your answer..
I already spend quite some time in trying to figure out the 3.6.4 mapping..
Wow..
It's like a whole new world of 'contollerism'..
What an amazing peace of work..will need quite some time to learn how to control this but it's a fine challenge.

Hereby once more a massive thanx to DJTT for achieving this and putting so much effort in making it possible for us to do our thing..

Respect..

[pARtybOy]

Firmware Kit is in stock now!

[JDT-NYC]

What Do I need to do to make the tempo fader in TP2 using FW 1.4 move up and down entirely. The only way the tempo fader moves up and down it's full spectrum is moving the platter when you are scratching. This sucks!
What do I need to do to make this change. I want to be able to control the tempo pitch.

How do I disable copy deck? I want to be able to control the pitch of each deck independently. I only use sync to fine tune the tempo pitch.

[fullenglishpint]

What Do I need to do to make the tempo fader in TP2 using FW 1.4 move up and down entirely. The only way the tempo fader moves up and down it's full spectrum is moving the platter when you are scratching. This sucks!
What do I need to do to make this change. I want to be able to control the tempo pitch.

How do I disable copy deck? I want to be able to control the pitch of each deck independently. I only use sync to fine tune the tempo pitch.

As I said in the other thread, you can't make the GUI pitch fader move all the way unless you want to compromise the resolution of the pitch fader. The display shows 50% and the actual movement is about 8%, which is standard. If you want to keep track of the pitch fader, maybe just keep an eye on the hardware one?

And I don't know what you mean by 'copy deck'.

[emptyx]

Hallo all,
please I need some help, since this is really exeeding my tech knowledge.

I was upgrading my charming VCI 100 FW 1,2 to 1,4.

I use Win 7 x64, i7 1,7GHz, 8GB Ram true DDR3, FDT 4,07.

I used USB 2,0 to Serial with settings: COM 6, waiting time 16 ms,
timeout 100ms, packet size 4096 bytes, plug and play enabled.

I flashed software with SUCCES - no timeouts, no connection problems -
I got answer from soft, that image was succesfully written to device
BUT (!!!)
or my device falls back to 1,2 or its not recognized by computer
(after upgrade plugged to computer) and its unknown device - USB
controller. (I had 5 succesful attempts for upgrade).
I never got to disco mode or I saw that pitch faders behaves as in 1,2
which was before. VCI is in mint condition, computer is in mint
condition, so I really do not know what to do.

PLEASE WHAT IS SOLUTION - I am out with my knowledge.

PS:I tried to experiment with different port settings in terms of
time, but it just lead to time out and to error 15024 (like timeout
problem when you use soft 4,05 on Win 7 x64).
PPS: I started to upgrade with version 4,05 - but no differences -
actually first upgrade worked like charm - in terms that soft said
succesful, but than fall back to 1,2
PPS: Can please someone sume up differences between behaviours of 1,2 - 1,3 -1,4. I know that 1,4 should have a disco mode (I am not admire of that, but I like resolution of 1,4). Is there possibility that VCI is in 1,4 but do not have disco mode - how does look pitch faders action in 1,4?

[emptyx]

I got it sorted - no clues what caused a change. 1,4 FW is great

[ricoot]

I'm still clueless... it's just not working properly for me.
I got no errors at all but it just does not work. I've been trying to flash for over 2 months now.

[ricoot]

i'm gonna try for the last time...

If i can't seem to find out what firmware i'm running on my vci i swear to god i'll just throw the damn thing away.

-I flashed for over 50 times without errors.
-i got no signs of 1.4 whatsoever (diy arcade so no disco mode, no on / off button toggling while de vci is on and traktor not started)
-still clueless on how to switch back to older firmware if 1.4 did actually install. (the previous video of ean doesn't work (anymore) for me)

sometimes my upper half of the vci doesn't give me led feedback untill i reboot or re-import the TSI (which i have to do every 30 minutes or so). this is why i think the firmware didn't install.

how can i check the high ress faders and pitch?
my pitch bend does steps of 0.4.. this was a FW 1.4 thing, right? RIGHT?!

this thing just freezes up at random moments (the tsi)

[emptyx]

Sorry that it doesnt work for u. Cant understand whats wrong. In case u wanna throw it, rather send it to me.
Cheers