Vci-100 1.4 (hd) firmware upgrade

[photojojo]

Is anyone else having this same problem? When I hit Play to play a track the song starts, but when I hit play again to stop the track it just takes it back to the beginning if the track, a cue point, or loop. In order for me to stop the track I have to use my keayboard and press the play button on the software

flashflooder has put one together for that makes it go back to normal play/pause.

http://www.djtechtools.com/forum/att...6&d=1285651704

File attachment is from post 13 in this thread.

http://www.djtechtools.com/forum/sho...t=18333&page=2
__________________

[EuphoricF]

Maybe you're trying with a USB to serial adaptor, which is not recommended.

Today I tried the same usb-serial Cable (And Computer, OS, Drivers...) I used for the upgrade to 1.3.
It also does not work. It really looks like my Firmwarekit is damaged.

Maybe I will order a new one and hope that this will help me upgrading the firmware.

[photojojo]

Damn.. it looks like my UpgradeKit doesn´t work anylonger.
The update to tw 1.3 worked just perfect.
When I now try to get into boot mode it alway fails..
Sometimes everything turns on just like in normal mode. Or just one Jog gets red or both or one red and one blue..

Are you 100% sure no buttons are being pressed when you try to get into boot mode? I put three rolls of duct tape under my VCI so that it will sit up off the table and no jogs or buttons get touched. I've heard of some sensitive jogs getting activated while the VCI was laying on a pillow.

[EuphoricF]

Are you 100% sure no buttons are being pressed when you try to get into boot mode? I put three rolls of duct tape under my VCI so that it will sit up off the table and no jogs or buttons get touched. I've heard of some sensitive jogs getting activated while the VCI was laying on a pillow.

Okay. Sounds interessting. I will give it a try. I will report back here when I tested it.
Thank you for that hint.

[EuphoricF]

OMG....
It is flashing...
Putting the VCI on a Roll of Ducktape seems to work now.

Now I will directly check it out in Traktor...

THANK YOU for that awsome hint! :-)

[photojojo]

God bless duct tape!!

[EuphoricF]

God bless duct tape!!

Indeed.
But the behaviour of the play button in the new mapping is crappy... :-(
Need to search for the fixed one.

[Michler]

I have a glitch problem (since 3.6.3 and fw 1.4) when I use the juggles's and shift buttons!
need help please

[photojojo]

Indeed.
But the behaviour of the play button in the new mapping is crappy... :-(
Need to search for the fixed one.

Post 141, top of previous page.

[BlackBox]

I have the firmware upgrade kit ordered. My pc has no serial port....
What problems do the serial to USB cable, exactly?