Download the Updated VCI-100SE Mapping (3_5_2)

[photojojo]

As a general rule, you should always check ALL your knobs/faders every time you start Traktor.

You sir are correct and I will adopt that as my start ritual.

Cris (flashflooder), we should add this to the walkthrough!

Phil.

You should stress that it needs to be the shift and reset to 0 feature and not just move the physical pitch fader to the center or you'll have a flood of people complaining that they're songs start out pitched up or down.

[sarasin]

Question:

If you only have FM1.2 and the 2.5 TSI overlay.....can I still use this 3.5.2 TSI?

Is it VERY different?

I guess I will answer my own question when I go through the content of the ZIP file.



Really wanting Fader FX....

[No Left Turn]

the pitch bend issue (the jmpin thing) wasnt fixed

good job anyways!


-gm

What exactly is this issue? I've heard it mentioned in this forum a few times now. I sort of have an idea of what you're describing in this thread, but not exactly...

[photojojo]

What exactly is this issue? I've heard it mentioned in this forum a few times now. I sort of have an idea of what you're describing in this thread, but not exactly...

Start Traktor, load a track, start the track, then move the pitch slider. How far is the initial movement? A few of us are seeing 8% as the initial pitch range adjustment. If you hold shift and move your pitch slider to center on the controller it zeros it out and doesn't appear to happen again until you start traktor up again. Even when everything was already at zero from the start.

[GPS]

Start Traktor, load a track, start the track, then move the pitch slider. How far is the initial movement? A few of us are seeing 8% as the initial pitch range adjustment. If you hold shift and move your pitch slider to center on the controller it zeros it out and doesn't appear to happen again until you start traktor up again. Even when everything was already at zero from the start.

This.

I have not had time to run tests, but I will when I have the time

I do hace one recommendation:

Shift+List Up = Snap(SNP) on/off
Shift+List Down = Quantize (QNT) on/off

Im my opinion....THIS WOULD BE SO USEFUL!!!!!!!

-Gianmarco

[GPS]

As a general rule, you should always check ALL your knobs/faders every time you start Traktor.

Phil.

ditto

I do this all the time, i mean think about it, rock bands sound check all the time before shows, same thing should be done here

-gm

[photojojo]

This.

I have not had time to run tests, but I will when I have the time

I do hace one recommendation:

Shift+List Up = Snap(SNP) on/off
Shift+List Down = Quantize (QNT) on/off

Im my opinion....THIS WOULD BE SO USEFUL!!!!!!!

-Gianmarco

From Phill's walk through which you've obvioulsy not had to time to read either
SHIFT + JUGGLE 1-4 will toggle Snap on/off
SHIFT + JUGGLE 5-8 will toggle Quantize on/off

[GPS]

From Phill's walk through which you've obvioulsy not had to time to read either
SHIFT + JUGGLE 1-4 will toggle Snap on/off
SHIFT + JUGGLE 5-8 will toggle Quantize on/off

my appologies, i have not had the time to read that, let alone try the new mapping

Anyways, in terms of the pitch jump issue, i ran some short tests

Steps:

-Turned on traktor, then VCI, moved the pitch bend, recalibrate after it jumped, problem solved. turned VCI on and off (while traktor was still on), problem did not happen again.

-Turned on VCI before traktor, turned traktor on, moved pitch fader and re calibrated once it jumped, problem solved. turned VCI on and off (while traktor was still on), problem did not happen again.

From this, it seems that the problem is with traktor. So after fixing the problem after I start it, it does not happen again until after I start traktor again. It does not matter (it seems) how many times I turn the VCI on and off while traktor itself is on.

Another note: the pitch always jumps all the way down no matter if u move it slightly up or down on the controller.

I did this test on all 5 pitch settings (8%, 10%, 35%, 50%, and 100%). On all instances they all moved all the way to the lower extrema if i moved the pitch bender down or up.

This test DOES NOT show if there are any problems after a while of use

NOTE: this is with the 3_5_1 mapping AND I FORGOT TO TEST DECKS C AND D! silly me

hope this helped

-gm

[flashflooder]

A new updated zip file has been attached to the initial post in this thread. If you downloaded it before this post, please re-download it since the mapping and walkthrough have both been updated.

Thanks to everyone who provided quick initial feedback on this mapping! All of the issues that were brought up seem to be solved now; however, if anyone finds anything else please let me know.

[No Left Turn]

Loving the quick support! Can't wait to try this when I get home.