Vci-300 tsi

[haze324]

Seen a few post lately for VCI-300 mappings. Here's one I've been messing around with. This is Soulst mapping that I've added Zac's jogwheel mapping and they work awesome. You need to make sure you press the scratch button and turn on scratch. Also, added all LEDs working (except for volume meters). Big change is Out Loop 1 turns on Delay for the desired deck and Outloop 2 triggers the freeze. What I have not fixed is that the lights turn on on both sides. SO whatever side you turn it on from, make sure you turn it off.

Mostly everything is set up similar to Itch and whats on the controller.

Trim = Filter. Press the button below it to turn on the filter
Trim + Shift = Gain

Shift + Keylocks = quantize and snap
The small pitch shift buttons assign effect 1&2

For searching for tracks you can press back to go down the tree and
pressing the center button plus the fwd button opens a folder.

Shift + crates = changes the left side EQ and Cue buttons to control
effects bank 1 for chained effects
Shift + browes = changes right side EQ and Cue buttons to control
effects bank 2 for advanced effects.

Use the cue and loop out buttons to turn on the effects and scroll for effects. Also while in this mode Shift + EQ buttons controls the actual EQ's.

Im sure I'm missing a few things, but mess around with it and you'll
figure most of it out. It still needs some polishing up to be good.
I think it needs another controller like an X1 (which is what I use
with it) to really get the most out of Traktor. But for a simple 2
deck easy mixing with good jogs and minimal use of effects this works
pretty damn well.

I plan on making out loop 3 a slice button or beatmasher, and I might just leave scratch on at all times since I don't ever pitch bend in traktor and use that button to trigger decks 3 and 4. Enjoy!

Again this was Soulst mapping so I give him full credit.

[bigbeatzz]

Thanks homie, you're the man!

Did you every get the jogs to pitch bend?....I tried on the one you gave me but was clueless when it came to the modifiers...The scratch function seems awesome.

Thanks again!!!

[haze324]

Oh shit...whats up big pimp. No man, I really haven't touched this much more. I'm relying on the sync button with Traktor and will pitch bend when using Itch

If you really need it, I don't think it'll be hard to add.

Also, I think the keyboard mapping with the .TSI is one Armyofme had up one time that each row of vertical keys are cue points for the decks. So decks 3 is A thru H and deck 4 is Z thru N.

So if you wanna drop samples off decks 3 and 4 you can do it off your keyboard.

[bigbeatzz]

Also, I think the keyboard mapping with the .TSI is one Armyofme had up one time that each row of vertical keys are cue points for the decks. So decks 3 is A thru H and deck 4 is Z thru N.

So if you wanna drop samples off decks 3 and 4 you can do it off your keyboard.

Nice one!

[zong]

Haze - my email is sundayradio@gmail.com when you get a chance

The one i tried to load into Traktor Pro is 300v7.tsi - 750 KB, not sure why it loaded blank for all MIDI

[haze324]

Reloaded with keyboard mapping and controller named VCI-300, had it as generic before. Also saved ports to the 300.


Zong, I juse downloaded what I posted and it was fine. Are you using a PC? Perhaps the file conversion from a mac jacked it up? I'll email it now.

[zong]

Yeah, I am using a PC. I bet that is the reason.

I'm loading it, and then selecting VCI-300 in the device. The assignment table is blank.

Oh well, maybe some other PC users can confirm.

[haze324]

Yeah, I am using a PC. I bet that is the reason.

I'm loading it, and then selecting VCI-300 in the device. The assignment table is blank.

Oh well, maybe some other PC users can confirm.

one last try. If anyone knows how to change this for PC users? I'm exporting .tsi to my desktop and then uploading. Just tried to rename the file and readded the .tsi file extension

[djdumbbi]

Uh.... Just tried it on my MBP 2008' and it works fine. Just the level meters are not working.

Turns off my Kontrol x1 though.

[haze324]

^ Cool. Glad it worked!!

Yeah I haven't mapped the level meters - figure I can keep an eye on the screen for those until I end up mapping them.

Not sure why it turns off your X1?