VCI-300 LED Diagram to help mapping

[Morbido]

that's a good starting point... haven't tried this yet, but i'll try and let you know

[Sheph]

one button on the VCI-100 (the one in the center of the browser section) is different. the button is A#6 and the LED is B6. the rest are all the same AFAIK.

[djDexter]

Well the "problem" with the vci-300 is that the midi nrs. of the buttons/knobs are different midi nrs. than the leds of the button/led, as far as i know with most controllers you dont have this, but correct me if im wrong? already tried it?

my ddm4000 mixer has also different numbers for his buttons / leds - as you describe - but there's a "midi receive overview" on the behringer homepage you can download

[10us]

You mean like a tool?
Can you post a link i cant find it on the behringer homepage...

[djDexter]

unfortunately not a tool - only a pdf sheet with all the numbers

http://www.behringerdownload.de/DDM4...0-19_Rev.0.pdf

[CodeMorse]

had a crack at mapping the vci 300 and got some results, thought I'd share, vu meter leds tend to cause a lot of crackle, which i managed to reduce via raising the latency, some of the leds assigned dont seem to work if when their counter part is assigned, i.e i assigned the sync buttons as a test but only one works if the other is mapped to an led, looks like progress is slow, and hampered by these little setbacks, anyone tried this?

[hellokatze]

"Send midi clock" will remove clackle. I see date of posts, thx for diagram btw.