Originally Posted by
TommyQuiet
Under "input settings" just change the input on both decks to the phono input with the turntable. Then you can midi-map buttons (or use your keyboard or mouse) which will toggle relative/midi mode on or off on each of the decks to change "focus." In other words it works like this:
Deck A receives input from Phono input 1
Deck B also receives phono input 1
Switch focus to deck A:
Midi Controller ---> Button 1 ---> press ---> Toggles relative mode on in deck A, toggles internal midi mode on in deck B
Switch Focus to deck B:
Midi Controller ---> Button 2 ----> Press ---> toggles relative mode on in Deck B, toggles internal midi mode on in Deck A
Or you could probably do it this way if you want just one button for on/off
Midi controller/Keyboard ---> set button mode to TOGGLE when setting up the controller ---> on is when When midi note send = 1, off is when midi note send = 0
First press (When note = 1) ---> Toggles relative mode on in deck A, toggles internal midi mode on in deck B
2nd Press (when note = 0) ---> Toggles relative mode on in Deck B, toggles internal midi mode on in Deck A
Bookmarks