The Ultimate FX Thread

[neilmcm]

Thanks Stewe going to map this tonight what was the button you pressed on the bottom row.

[Stewe]

The first button in bottom row is mapped for peak filter but it comes inverted so it makes that nice sweep down when you hit it. Other three buttons are just beat mashers with three different value.

[neilmcm]

Cool what the settings you have for it. cheers

[Stewe]

Peak is D/W = 1.000 ; Knob = 1.000 and duplicate of same command with 'dec' mode (auto repeat check)

Beatmashers are all at D/W = 0.750 ; Button 1 = 0.500 ; Button 2 = 0.800 ; Button 3 = 0.900

Have fun

[0Notice]

I really like the delay grat. Sounds really good.

[bascurtiz]

Sweeet!
Profi sound, I like

But how do I make this work?
I mean, where do I put those knob values + d/w in?

Am I going the right way tho? See pic below:

ramp-delay.jpg

[Stewe]

Add in dry/wet or any knob command > set type of controller to BUTTON > set interaction mode to DIRECT > set a value for each parameter from list.

Sorry I didn't give explanation of this path but as I've posted many parameters here before and the most guys that are following this thread know some of mapping basics and how to get this stuff working.

Hope that helps.

[DJ G-REG]

I just mapped an echo freeze effect on my DDJSX and it works great. Does anyone know how I can make the button illuminate when the effect is on?

[Stewe]

Use add OUT menu to choose LED output for any command.

Add Out > FX Unit > Unit On / set unit deck target

[DJ G-REG]

Use add OUT menu to choose LED output for any command.

Add Out > FX Unit > Unit On / set unit deck target

YOU ARE THE MAN!!! Thank you very much!