How to Blink Track End Warning

[Stewe]

Yes, if you want to use it obviously

[Stewe]

Here is example for deck A:

Add in / Modifier 1 / direct / value 1
Add out / Beat phase / ModCon M1=1
Add out / End warning time

Everything mapped to toggle button.

[Deniz343]

Last question about mapping modifier#2. Can I map MF2 to MF1(Shift Button).

[Stewe]

No modifiers 1 and 2 need to work separately for each deck.

[Stewe]

Any luck on this?

[Deniz343]

Any luck on this?

I have no time to test it this week. I'll let you know when I do it. Thanks for your interest.

Best Regards

[Deniz343]

It didn't worked. I created two output for track end warning. First one M1=1 ch2.cc.42. Second one M2=1 ch2.cc.42.

[Stewe]

It didn't worked. I created two output for track end warning. First one M1=1 ch2.cc.42. Second one M2=1 ch2.cc.42.

You mapped both deck's end warning to one button ch2.cc.42? you need to use two buttons - one for each side.

[Deniz343]

You mapped both deck's end warning to one button ch2.cc.42? you need to use two buttons - one for each side.

No ch2.cc.42 is the track end warning output. M1 is mapped to ch3.cc.05 and M2 mapped to ch3.cc.30.

[Stewe]

Take modifier 1 and map it to ch2.cc.42 where your end warning deck A is set and take modifier 2 and map it to some other button for deck B.