You can dl a demo version from NI and play a bit. It'll allow you to do make some mappings and replicate my parameters I've posted for ya..
You can dl a demo version from NI and play a bit. It'll allow you to do make some mappings and replicate my parameters I've posted for ya..
Nice one Stewe. I'm actualy on the look out for a printed manual (see my wanted ad in Buy & Sell once it's been approved) before I get my hands on the demo.
I'm a manual fiend. I have manuals for everything - and they all have Post-it page tabs all over them!
DJ'ing: 2x1200MK2, DJM 850, Dicers, F1, Zomo MC-1000, Sony MDR-v700, i7 Win 10 HP Envy
Production: Ableton Live 8 and a mouse, Sennheiser HD400, Sony VAIO
Click HERE to D/L Free Tracks from Soundcloud!!!
https://www.facebook.com/Patchdj
Traktorbible it is
i just set mine as remix decks,
then i just drop an entire track into say Slot 1 column 1
and keep my samples in the other slots which trigger by my F1 or MF3D.
Podcasting 101: How to get into iTunes (the Q&A thread)on DJTT Antifmradio.com
I'm quite sure that when I get Traktor I won't be getting an F1 - so only the top 4 slots of the remix decks will used.
Good to know that whole tracks can be loaded into a single Remix Deck slot! Can you use cue points in the Remix Deck Slot? Could I potentially use slot 1 of Row 1 as a normal player deck? I'm thinking I might use slot 1 as a track deck, if possible...
DJ'ing: 2x1200MK2, DJM 850, Dicers, F1, Zomo MC-1000, Sony MDR-v700, i7 Win 10 HP Envy
Production: Ableton Live 8 and a mouse, Sennheiser HD400, Sony VAIO
Click HERE to D/L Free Tracks from Soundcloud!!!
https://www.facebook.com/Patchdj
no thats not possible
no because you have already assigned it to be a remix deck
Therefor you can not have a TRACK deck inside a REMIX DECK
however, what you can do is
set your hotcue points anywhere in the tracks you want (they must be loaded into a track deck (a or b)
at CUE POINT 1, set your LOOP IN
at cuepoint 2, set your LOOP OUT
now you can take that section and assigne JUST THAT to Slot 1 row 1 and trigger it as often as you want
Now goto that same original track
Check your LOOP OUT at cue 2 to a LOOP IN at cue two.
Move ahead in the track to cue 3 and set your LOOP OUT there
Ok now you have another LOOP IN and OUT area.
Snag that, and move it to slot whatever, row whatever in the remix deck
try it on the demo and youll get it
but this most eaisest done using and F1 attached because with theclick of two buttons
you can tell it
Take THIS loop area.... move it to THIS ROW +SLOT
Podcasting 101: How to get into iTunes (the Q&A thread)on DJTT Antifmradio.com
I think my toggle idea (track deck/remix deck) gets me where I need to be...
DJ'ing: 2x1200MK2, DJM 850, Dicers, F1, Zomo MC-1000, Sony MDR-v700, i7 Win 10 HP Envy
Production: Ableton Live 8 and a mouse, Sennheiser HD400, Sony VAIO
Click HERE to D/L Free Tracks from Soundcloud!!!
https://www.facebook.com/Patchdj
Hi. Thanks for that information! Fully Usefull!!!
My question is if after map the toogle between track or remix decks, is it posible to let this change only if the deck is not playing and how.
Thanks!
Sorry to revive such an old thread but I've just followed these instructions to map a control to switch deck flavors and it's working great. Now I'm wondering if there is a way to have a remix set remain loaded (or automatically load) onto the remix deck once the deck flavor is switched from Track deck to Remix deck. The idea is that I'd have 4 Track Decks by default but when I switch deck C or D to Remix decks, there would be samples present ready to play or at the very least, once I load a remix set into a remix dck, if I change flavor to track deck and then return to remix, the samples are still there.
|
Bookmarks