I'm trying to have the same function on buttons, that I had before in the 2.5.1 on my NanoKontrol.
If someone has a idea on how could I do it, i would be very happy. Here's the deal.
Button from 1 to 8, are hot key's: Push the button, it cue automatically to the assign hot key's and drop a loop at the same time.
1-8. Mapping 2.5.1= select/set+store hot cue « button hold »
loop size select+set « button direct »
Problem in 2.6: Now, when I push the button, it goes to the good hot key but the Loop become active only when the hot key's is not save as a loop.
Button 9, drop a loop: push the button, it drop a loop. If a loop is already engage hot key's or elsewhere, it will turn it off. Than if you push it back, it will drop a loop again, the size that i determine with a pots.
9. Mapping 2.5.1= loop active on « button toggle »
loop set « button trigger »
Problem in 2.6: Now it only deactivate the loop, it doesn't droop a loop anymore. That's because the function trigger is not there anymore. that's why I need help here. I didn't find the solution on how.
Jpdretro
Bookmarks