-
-
DJTT Infectious Moderator
Have you tried adjusting the jog sensitivity with the dials on the back?
-
Yes I have tried it. It does not seem to work. I always have to touch the metal surface somewhere to turn the platter lights from blue to red (showing that they work.)
Last edited by unfazed; 08-25-2011 at 07:24 PM.
Reason: correction
-
DJTT Infectious Moderator
First thing I would try would be to try and tighten the screws on the top plate. If that doesn't work then maybe connect a wire between the VCI and the Audio 4 and see if that helps.
-
-
So I figured the issue is not with the vci but with my laptop. It worked flawlessly with my friends laptop so i will have to look into a way to fix my laptop. Thanks for ur help photojojo.
-
DJTT Infectious Moderator
Does it do it with your laptop plugged in? You could try a ground loop isolator on the laptop plug. Maybe a good powered USB port?
-
DJTT Infectious Moderator
Also have you tried plugging in the VCI with a power supply?
-
Tech Mentor
you have to touch the metal part of the platter for the jog to sense, the outer part is for pitch bend
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks