hey where did you find the arcade buttons, and have you modified the depth of the enclosure at all?
hey where did you find the arcade buttons, and have you modified the depth of the enclosure at all?
I ordered the fader (Just came in!), hopefully a good choice.
Arcade buttons are from;
http://www.lizardlickamusements.com/...hbuttons.shtml
and then the Seimitsu 24mm Colored Body with Clear Plunger.
I kept the original depth of the enclosure, as you can see the jogwheels are
sticking out the most.
Last edited by Anthony More; 02-09-2009 at 11:41 AM.
Macbookpro 2.4 i5 4gb
Traktor Pro 1.2.6.
Black VCI-100 Mod firmware 1.3
Presonus Firebox
Cheers for that, looks like a better option than the 15 USD Ea halo button I was looking at for the LFO reset on my controller
Last edited by Anthony More; 02-14-2009 at 04:21 PM.
Macbookpro 2.4 i5 4gb
Traktor Pro 1.2.6.
Black VCI-100 Mod firmware 1.3
Presonus Firebox
I was almost finishing the hardware side of my mod, and then it came up to me to mod the 3 efx lights/leds, and the loop buttons.
I wanted a larger light to put on some text, but now I made it work I'm
not shure about the text.
Looks great already.
Don't judge my solder connections (Everything works)
I'm not a pro!
Macbookpro 2.4 i5 4gb
Traktor Pro 1.2.6.
Black VCI-100 Mod firmware 1.3
Presonus Firebox
Here the mod of the loop buttons.
There was no room on the board to drill holes to attach the buttons,
so I attached them on the housing.
Also made a cable to make it easy to disassemble the board.
Here again very nice soldering
The 'hardware' mod is now almost finished.
5 knobs are on the way, and the housing for the backside will be designed
in a couple of days.
Now I have to figure out how adobe illustrator works, so that I can design an
overlay, (with smaller and adjusted holes).
Cheers!
Last edited by Anthony More; 02-14-2009 at 04:10 PM.
Macbookpro 2.4 i5 4gb
Traktor Pro 1.2.6.
Black VCI-100 Mod firmware 1.3
Presonus Firebox
Nice Work,
Hope you show me the working peace.
I missed this post before. Really nice work. I have been dreaming on modifying a vci but I donīt have the skill and knowledge.
Congratulations, your work is great!!
Pd: on my dream I had a Vci with 4 platters.... ummm
|
Bookmarks