I tried, I failed...any help would be very much appreciated.
I am using the serial to usb cable from Monoprice. I installed the drivers from the disk that comes with it.
One question I have is, there is no option for COM1, only COM3. Is that how it is supposed to be?
This is what my window says at the end.
I also set the delay to 1000.
Any help would be great, thanks
OS: Windows XP [Admin]
FDT API initialised: version 4, 02, 00, 008
Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A
Connecting to device 'H8/3052F' on 'COM3'
Configuration:
'BOOT Mode' connection - using emulated interface
Opening port 'COM3' ...
Loading Comms DLL
Loaded Comms DLL
Initiating BOOT SCI sequence
Attempting 9600
Received immediate response from device: 0x55
Attempting 4800
Received immediate response from device: 0x55
Attempting 2400
Received immediate response from device: 0x55
Attempting 1200
Received immediate response from device: 0x55
Error No 15024: Boot failed
Bookmarks