MF Instant Gratification Mapping V1.0 (S4 and other controllers)

[Rusty]

In other news, I updated my FW yesterday evening but the combos won't lock, like some others have said it seems like I still only have 1 option for 4banks mode. Have I just missed something obvious?

I have the same problem. I updated my firmware successfully. When I enter the menu mode to set the 4 Banks mode I only get two options: Off (no LEDs) or External (4 LEDs). I do not get the option for Internal. I have tried reflashing my MF and still have the same problem. Any suggestions?

[fullenglishpint]

http://www.djtechtools.com/forum/sho...?t=9961&page=5

[Helldrift]

can i map it to a akai mpk25's drum pads? (it also is 4x4)

[fullenglishpint]

can i map it to a akai mpk25's drum pads? (it also is 4x4)

No, you need a FOUR BANKS MODE which uses the top line of buttons to select 4 sets of 12 for the bottom 3 lines. This is a mode built into the firmware, not made with modifiers. You may be able to map it by using pages but I haven't seen a diagram of the notes anywhere yet.

[dros]

Hi,

I'd like to program my Korg padKontrol to send the same messages as a Midi-Fighter. Is there any layout of the pre-programmed notes and modifiers for the Midi-Fighter available ?

I'd like to have the same template as a Midi-Fighter with the 4 banks enabled, but on the padKontrol so as I can import the same mapping and use it with the padKontrol.

The fact is that the padKontrol actually has multi-scene capabilities, so I guess I only need to know which are the messages sent for each button on each bank.

Thanks in advance.

[fullenglishpint]

you'll have to ask fatlimey.

[obri3n]

Could this be easily mapped to Maschine pads?

[fullenglishpint]

Could this be easily mapped to Maschine pads?

I doubt it would be easy:

No, you need a FOUR BANKS MODE which uses the top line of buttons to select 4 sets of 12 for the bottom 3 lines. This is a mode built into the firmware, not made with modifiers. You may be able to map it by using pages but I haven't seen a diagram of the notes anywhere yet.

[Florian Arndt]

There´s one thing I really don´t like about the whole thing...it is the fact, that you have to import the Effect Settings...that means, that if you previously used the S4´s MIDI functionality to store chained effect presets, those are basically gone.

So I had to study Ean´s video and adjusted the effect settings of the MF mapping accordingly...

[Fatlimey]

Hi,

I'd like to program my Korg padKontrol to send the same messages as a Midi-Fighter. Is there any layout of the pre-programmed notes and modifiers for the Midi-Fighter available ?

I'd like to have the same template as a Midi-Fighter with the 4 banks enabled, but on the padKontrol so as I can import the same mapping and use it with the padKontrol.

The fact is that the padKontrol actually has multi-scene capabilities, so I guess I only need to know which are the messages sent for each button on each bank.

Thanks in advance.

Here's the specs from the README file on Sourceforge:

Fourbanks Internal
------------------

Fourbanks Internal mode sets aside the top row of four keys as Bank Select
keys, selecting between four different banks of keys where each bank is
accessed using the lower 12 keys. The currently selected bank is highlighted
with an LED on the top row. When a Bank Select key is pressed, the LED on
that key is illuminated and the bottom three rows of buttons switch their
Note values and LED state to reflect the newly selected bank.

The bank is selected by reacting to the most recently pressed key, and if
two keys are pressed simultaneously the leftmost key is selected. When a
bank key is pressed it emits a "Bank Select" NoteOn and the unselected bank
(even if it is currently active) sends a NoteOff. Bank select notes are in
the range 0 to 3. After the bank is selected, only the currently active bank
can emit NoteOn/NoteOff events as a normal key. This ensures that only one
Bank is selected at any time.

Key LEDs can be controlled by sending the Midifighter a NoteOn event with
the same channel and Note that the key generates. Note states are tracked
across all four banks and LEDs will correctly reflect the NoteOn/NoteOff
state of the keys as you switch banks.

Adding in the Bank Select notes and expansion port notes (described later),
the Fourbanks Internal MIDI map looks like this:

    .  .  .  .   <- 124 .. 127
    .  .  .  .   <- 120 .. 123
    .  .  .  .   <- 116 .. 119
    .  .  .  .   <- 108 .. 115
   A2 A2 A3 A3   <- 104 .. 107 = Smart Fader 2,3
   A0 A0 A1 A1   <- 100 .. 103 = Smart Fader 0,1
    .  .  .  .   <- 96 .. 99
    .  .  .  .   <- 92 .. 95
    .  .  .  .   <- 88 .. 91
    .  .  .  .   <- 84 .. 87
    4  4  4  4   <- 80 .. 83 = bank 4 
    4  4  4  4   <- 76 .. 79 = bank 4 
    4  4  4  4   <- 72 .. 75 = bank 4 
    3  3  3  3   <- 68 .. 71 = bank 3 
    3  3  3  3   <- 64 .. 67 = bank 3 
    3  3  3  3   <- 60 .. 63 = bank 3 
    2  2  2  2   <- 56 .. 59 = bank 2 
    2  2  2  2   <- 52 .. 55 = bank 2 
    2  2  2  2   <- 48 .. 51 = bank 2 
    1  1  1  1   <- 44 .. 47 = bank 1 
    1  1  1  1   <- 40 .. 43 = bank 1 
    1  1  1  1   <- 36 .. 39 = bank 1 
    .  .  .  .   <- 32 .. 35
    .  .  .  .   <- 28 .. 31
    .  .  .  .   <- 24 .. 27
    .  .  .  .   <- 20 .. 23
    .  .  .  .   <- 16 .. 19
    .  .  .  .   <- 12 .. 15
    .  .  .  .   <- 08 .. 11
   D1 D2 D3 D4   <- 04 .. 07 = Digital Input
   S1 S2 S3 S4   <- 00 .. 03 = Bank Select