This is just the upgrade kit, for the firmware only. The plates will be for another day. This kit is also going to to give you, as advertise, the VCI-100 SE functions. I would suggest to start reading the documents and seen the videos. The VCI-100 SE support forum should guide you with any FAQ and issues. I suggest to read the first three posts, they deal with both issues.
I had the same question, and mr. golden said as of now there will be no mac version. However, quick 1-time upgrade. Get a PC buddy to help ya out and you should be fine.
Thanks for all the hard work Ean & team! I’m so excited to be rockin the new firmware! It’s Christmas in August! Then, when I get my new plates in Sept it’ll be Christmas in September.
Ok…so this firmware update basically turns and VCI-100 into the SE? So I don’t have to try and top the eBay bidding to get the revised features of the SE? That would make me happy.
I think the credit goes out to Midifiddler (sp?) for creating this, but credit for Ean to actually getting distributing this beauty I’ll post a link for the 1.2 firmware once I confirm I get some flashing in.
By the way, I’ve got my money on that you can flash from VMWare/Parallels/Bootcamp on your mac, but I’ll post my results once I get some testing in.
ATP - “Ok…so this firmware update basically turns and VCI-100 into the SE? So I don’t have to try and top the eBay bidding to get the revised features of the SE? That would make me happy.”
So, I got mine today! Just to clarify. Can I use either a normal serial cable or a serial to USB cable to connect to the firmware kit? I have a serial port. I just want to make sure because will need to buy either cable.
Yes, everything produced by us will always ship worldwide. A full kit, once all the parts are in, will be available. While we wont be making plates, there is something much,much better in the works that will make everyone very happy. More on that soon.
For all support and questions about the firmware update process please visit the forum:
Has anyone else that’s gotten the upgrade kit had trouble with getting the VCI-100 into Boot Mode? I’ve posted on the forum but there’s only a few people looking at that right now. Any help is appreciated!
Exactly. The firmware upgrade changes the behavior of some buttons and reconfigures midi notes. It allows multiple midi notes to be sent out by a single knob or button, so that Ean’s special configuration can be used.
no, thomas, the vci-100 only sends out one message per button and is not configurable. firmware 1.3 sends out specific multiple messages that are useful in traktor.
Why when I download the 1.3 firmware it always downloauds as MPEG Quicktime file PLS can you send me the one that will work
your computer thinks its a quick time file because its not sure what format it is in. If you follow the steps in the forum and video and load the file in the renessas program then it will be recognized. The file does not get double clicked but is loaded directly into the program.
So, if i have a vci with 1.2 firmware do i need the upgrade pcb or is this only for people with 1.1 firmware. How do i upgrade to 1.3? Is it using the software and the usb lead it comes with?
I’ve taken the steps to check the firmware, but I have Euro edition and the lights light up either way, at first they are green, then I click the snap button and it turns blue, then I have to click it twice (maybe 3 times) and it turns green again. Does this confirm being on 1.3?
I’ve taken the steps to check the firmware, but I have Euro edition and the lights light up either way, at first they are green, then I click the snap button and it turns blue, then I have to click it twice (maybe 3 times) and it turns green again. Does this confirm being on 1.3?
yes- thats 1.3 alright. That was the only way I could make one TSI file work for 1.2 and 1.3 users. You can change the SNAP mapping to hold and it will work the right way.
Yes, FINALLY!! Thank you very much, cant wait to get mine!
Thanks so much for your generous work! ..very helpful.
“the VCI-100 upgrade kits will be on sale in mid September”
that ^kit mentioned will include the firmware upgrade kit and plates?
Ean Golden you are the best forever man!!! cant wait to get mine ty so much
Let me ask you this so the vci 100 will be with the same fuctions as vci ean golden edition???
RayU, i got the feeling there aren’t gonna be plates to be bought :(
Ok i shouldn’t say stuff before watching the video :P
nice one! keep it up
although i’m wondering how you would connect the upgrade kit serial port to a laptop if u didn’t have such a cable, but would have a serial port
This is just the upgrade kit, for the firmware only. The plates will be for another day. This kit is also going to to give you, as advertise, the VCI-100 SE functions. I would suggest to start reading the documents and seen the videos. The VCI-100 SE support forum should guide you with any FAQ and issues. I suggest to read the first three posts, they deal with both issues.
Just one question, when will the mac version will be release?
@ luv2xra
I had the same question, and mr. golden said as of now there will be no mac version. However, quick 1-time upgrade. Get a PC buddy to help ya out and you should be fine.
Cant wait to update, sick of my 1.1 firmware lol
Thanks for all the hard work Ean & team! I’m so excited to be rockin the new firmware! It’s Christmas in August! Then, when I get my new plates in Sept it’ll be Christmas in September.
…So what do you have planned for Oct and Nov?
I’m going to play the VCI-100SE feature tour vidoes on loop until my firmware arrives.
Ok…so this firmware update basically turns and VCI-100 into the SE? So I don’t have to try and top the eBay bidding to get the revised features of the SE? That would make me happy.
Does the upgrade kit mini board stay inside the unit?
How do you go between 1.2 and 1.3 firmware once you update?
How much will the plates be?
Thanks to everyone responsible for this!
BTW: any future mods (like blue LEDs) in the works?
I think the credit goes out to Midifiddler (sp?) for creating this, but credit for Ean to actually getting distributing this beauty I’ll post a link for the 1.2 firmware once I confirm I get some flashing in.
By the way, I’ve got my money on that you can flash from VMWare/Parallels/Bootcamp on your mac, but I’ll post my results once I get some testing in.
sgb
ATP - “Ok…so this firmware update basically turns and VCI-100 into the SE? So I don’t have to try and top the eBay bidding to get the revised features of the SE? That would make me happy.”
Yes thats correct :)
Will a delivery of the whole kit to Germany be possible?
So, I got mine today! Just to clarify. Can I use either a normal serial cable or a serial to USB cable to connect to the firmware kit? I have a serial port. I just want to make sure because will need to buy either cable.
Yes, everything produced by us will always ship worldwide. A full kit, once all the parts are in, will be available. While we wont be making plates, there is something much,much better in the works that will make everyone very happy. More on that soon.
For all support and questions about the firmware update process please visit the forum:
http://www.djtechtools.com/forum/forumdisplay.php?f=13
so.
Just got my Firmware in the mail, and this afternoon will be modding it.
I will let everyone know how it turned out.
Has anyone else that’s gotten the upgrade kit had trouble with getting the VCI-100 into Boot Mode? I’ve posted on the forum but there’s only a few people looking at that right now. Any help is appreciated!
http://www.djtechtools.com/forum/forumdisplay.php?f=13
I’m also having trouble on the last step of installation. I posted in the forums, any help is greatly appreciated!!
Donøt quite get it yet. What is it that the firmware do? upgrade your MIDI controller in some way????
Exactly. The firmware upgrade changes the behavior of some buttons and reconfigures midi notes. It allows multiple midi notes to be sent out by a single knob or button, so that Ean’s special configuration can be used.
Oh, okay, I haven’t got the VCI YET! :D
So it can’t already bind one button to more than one function???!!
no, thomas, the vci-100 only sends out one message per button and is not configurable. firmware 1.3 sends out specific multiple messages that are useful in traktor.
God! :D Then I MUST HAVE this firmware :D
and really good job with all this Ean ;)
Check out this post for more info:
http://www.djtechtools.com/2008/09/02/the-vci-100-ne-nintendo-edition/
The overlays will be coming out in about 2 weeks,
Thanks for the insite! You dont find stuff like this just anywhere on the internet.
??????? ?? ???????? ?????????? ? ? ??? ???? ????????? ???????????!
–
? ????? ??? VCI-100
Why when I download the 1.3 firmware it always downloauds as MPEG Quicktime file
Why when I download the 1.3 firmware it always downloauds as MPEG Quicktime file PLS can you send me the one that will work
your computer thinks its a quick time file because its not sure what format it is in. If you follow the steps in the forum and video and load the file in the renessas program then it will be recognized. The file does not get double clicked but is loaded directly into the program.
Hey Ean, I’m trying to install the firmware, but in going to the process, when I get to the last step with Flash, I get an error 15024 Boot failed?
Scratch that, I changed the port to COM 5 and it worked, I was using a Sony Viao.
So, if i have a vci with 1.2 firmware do i need the upgrade pcb or is this only for people with 1.1 firmware. How do i upgrade to 1.3? Is it using the software and the usb lead it comes with?
A little confused thats all
Regards Michael
I’ve taken the steps to check the firmware, but I have Euro edition and the lights light up either way, at first they are green, then I click the snap button and it turns blue, then I have to click it twice (maybe 3 times) and it turns green again. Does this confirm being on 1.3?
yes- thats 1.3 alright. That was the only way I could make one TSI file work for 1.2 and 1.3 users. You can change the SNAP mapping to hold and it will work the right way.